Pebblebee Clip Model and Dog Collar Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pebblebee clip holder to fit a dog collar. Also included a model of the clip if you want to model your own.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pebblebee makes a smaller tracker with range similar to Tile with a dog collar holder. The Clip is UWB and has a similar range to Apple Airtags. The Tile has about half the range of an Apple Airtag.
So, if you are on Android and want a pet tracker, the Pebblebee Clip seems to be a good option.
Unfortunately, it appears you can't buy a holder! So, I made one.
Instructions (You will need a very flexible TPU. I used Ninjaflex 85A):
1. Print some test prints with supports, maybe taking this model and chopping it up. I used tree supports, which made it much easier to pull the supports out with some needle nose pliers.
2. You may need a little more vertical clearance between the top and bottom of the supports.
3. Use enough wall loops and infill to make it solid. I printed with a 0.6mm nozzle. So, if you print this with a 0.4mm nozzle you will need to use more than I did.