1 / 9
Sulzer ABS Pump Retaining Clamp – 42050033 (Klemmbügel) — zdjęcie 1
1 / 9

Sulzer ABS Pump Retaining Clamp – 42050033 (Klemmbügel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Retaining Clamp for ABS Sulzer Robusta 202 B/WKS (Nirolift, up to 1992) – Part No. 61705755

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Funktionsbeschreibung – Deutsch

Dieser Klemmbügel dient zur Fixierung einer Sulzer ABS Saugpumpe im Ablauf- bzw. Schachtsystem, indem er die Pumpe gegen das Abflussrohr drückt und so eine sichere Positionierung gewährleistet.

Beim Original-Klemmbügel kann es im Laufe der Zeit zu einer Materialverformung und zum Nachgeben kommen. Dadurch wird die Pumpe nicht mehr mit der erforderlichen Kraft an das Abflussrohr gedrückt, was zu einem unsicheren Sitz oder Funktionsproblemen führen kann.

Dieses 3D-Ersatzteil ist verformungsstabiler ausgelegt und bietet eine dauerhaft zuverlässige Klemmkraft.
Es sind zwei Varianten verfügbar:

  • Variante v1: mit Originalmaßen als direkter Ersatz

  • Variante v2: um 2 mm in Richtung Pumpe versetzt, wodurch die Pumpe fester an das Abflussrohr gedrückt wird


Druckeinstellungen:
  • Schichthöhe: 0,2 mm

  • Filament: PETG

  • Stützstrukturen: Organisch, nur vom Druckbett

  • Perimeter: 5

  • Konturhülle: 5 massive Schichten

  • Infill: 50 %


Function Description – English

This clamp is used to secure a Sulzer ABS suction pump inside a drainage or shaft system by pressing the pump against the discharge pipe, ensuring a stable and reliable installation.

Over time, the original clamp may deform and lose stiffness, causing it to yield and no longer apply sufficient force to press the pump firmly against the discharge pipe. This can result in an insecure fit or operational issues.

This 3D replacement part is designed to be more deformation-resistant, providing long-term clamping stability.
Two versions are available:

  • Version v1: original dimensions for direct replacement

  • Version v2: shifted 2 mm closer to the pump, applying higher clamping force and pressing the pump more firmly against the pipe


Print Settings:
  • Layer height: 0.2 mm

  • Filament: PETG

  • Supports: Organic, build plate only

  • Perimeters: 5

  • Shell: 5 solid layers

  • Infill: 50 %

Tagi