Smart IKEA FADO lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build a smart, tap-activated IKEA FADO lamp using a Wemos D1 mini ESP8266, an LED ring & a 3-axis accelerometer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Transform your standard IKEA FADO table lamp into an interactive Smart Home gadget! 💡✨
The original base of the FADO lamp is too small to hide smart electronics. This custom-designed replacement base provides enough space to mount a D1 Mini (ESP8266), an LIS3DH accelerometer, and a WS2812b LED ring.
Why this upgrade?
Tap Control: Thanks to the accelerometer mount, you can toggle the light simply by knocking on the glass sphere.
Clean Look: All electronics and cables are hidden inside the 3D print.
ESPHome Ready: Designed for seamless integration with Home Assistant.
📝 Full Tutorial & Code
I have written a detailed guide on how to wire everything up and provided the full ESPHome YAML code (including the tap-detection configuration) on my blog.
👉 Read the full tutorial here: https://the-smart-home-maker.com/from-boring-to-brilliant-the-smart-ikea-fado-upgrade-with-esphome/
🛠 Bill of Materials (BOM)
IKEA FADO Lamp (or similar glass sphere lamp)
Wemos D1 Mini (ESP8266)
LIS3DH Accelerometer (for tap detection)
WS2812b LED Ring (12, 16, or 24 LEDs)
Micro-USB Cable & Charger
🖨 Print Settings
Material: PLA or PETG (White is recommended for the top part to reflect light, though it is covered by the sphere).
Supports: Yes (Required for the internal cable channels/mounting points).
Infill: 15-20%
Layer Height: 0.2mm
Happy Printing! If you make this, please post a make and let me know how the tap control works for you!