Enclosure for G528 peristaltic pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for G528 peristaltic pump so the bare wires aren't exposed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
I needed a peristaltic pump and ended up with the G528 (amazon). Works fine for my purpose but with the bare wires I wanted an enclosure. Printed for a CoreOne I designed it with .15mm tolerance for the lid. No idea if this is a generic size, but the center distance for the installation holes are 48.5mm in this case.
To fix the pump to the main body I used M3x12 screw with a washer. The M3 nut fits in the hexagonal openings. Power-cable comes through the side and I just laid a knot in it to prevent it tugging on the contacts.
The lid itself has ridges on the side in 3 places so it snaps in without any glue. Enjoy!