Enclosure for G528 peristaltic pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for G528 peristaltic pump so the bare wires aren't exposed.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
I needed a peristaltic pump and ended up with the G528 (amazon). Works fine for my purpose but with the bare wires I wanted an enclosure. Printed for a CoreOne I designed it with .15mm tolerance for the lid. No idea if this is a generic size, but the center distance for the installation holes are 48.5mm in this case.
To fix the pump to the main body I used M3x12 screw with a washer. The M3 nut fits in the hexagonal openings. Power-cable comes through the side and I just laid a knot in it to prevent it tugging on the contacts.
The lid itself has ridges on the side in 3 places so it snaps in without any glue. Enjoy!