AD5X PTFE Tube Bend Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleeves to create a smooth 90 deg bend in PTFE tubes.
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 528
- Wydruki
- 3
- Wyświetlenia
- 2588
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When you add the enclosure kit to an AD5X the filament tubes have to bend pretty extremely from the IFS into the print chamber and this puts a lot of strain on the IFS connectors. Print 4 of these sleeves and thread the PTFE tubes through them to force a nice bend in them without putting so much strain on the IFS connectors. They also help prevent the tubes from rubbing against the enclosure top.
It ain't complicated, but it doesn't need to be.
UPDATED to v2
I've added a slot on one side so that they can be popped onto the PFTE tubes without having to disconnect them first.