Parametric TCG Card box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little origami/foldable box for cards. Parametric so you can make one for your need
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a foldable, origami-style card box , made specifically for TCG cards.
I needed a box to ship a decent amount of cards, in sleeves, without having to topload all of them.
The model is fully parametric, so you can easily adjust its size depending on how many cards you want to store, ship, travel with, etc.
The box is designed to be printed flat, then folded into shape after printing. No hinges, no glue, no magnets. Just folds.
Features
Designed for TCG-sized cards
Parametric model (easy to customize)
Prints flat, folds into a box
Clean, simple geometry
Ideal for deck storage, transport, etc
How to Customize the Size (Fusion 360)
You can change the size of the box directly in Fusion 360 using parameters.
Open the F3d file
Go to Modify → Change Parameters
Look for the parameter " NbCards "
Change the value to match how many cards you want ( bellow 5 can have weird reaction, above 55 can be too big for most build plate )
The model will automatically resize to fit
No manual scaling needed. The folds and proportions update automatically.
Printing Notes
Print flat as provided, with the grooves on the top.
No supports required
Works best with materials that allow slight flex (PLA works, PETG even better)
Layer height of 0.12 mm is best, no infill of course, just top/bottom layers
Use Cases
TCG decks
Compact card storage
Custom-sized card boxes without redesigning from scratch