1 / 2
Functional Replacement Bath Plug for Artweger Twinline (Non-OEM) — zdjęcie 1
1 / 2

Functional Replacement Bath Plug for Artweger Twinline (Non-OEM)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjustable Artweger Twinline plug fix – PETG printable, no supports, EU repair clause compliant.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

After many years of use, the plug in our Artweger Twinline bathtub began sitting too low during drainage, causing water to pool. Since in our installation the cable mechanism and adjustment screw are inaccessible behind tiles, I designed a functional replacement plug with a slightly extended length.

This is a non-OEM, 3D-printable spare part intended for personal repair purposes only. It is not affiliated with, endorsed by, or produced by Artweger GmbH & Co. KG.


Key Features:

  • Adjustable length: Easily modify the plug’s height in the OpenSCAD file to fit your needs.

  • Material: Tested in PETG (recommended for durability and water resistance).

  • No supports needed: Organic supports (build plate only) were sufficient in test prints.


Printing Recommendations:

  • Material: PETG (for water resistance and durability).

  • Supports: Not required (tested with organic supports on the build plate only).

  • Customization: Adjust the plug’s length in the OpenSCAD file if needed.


Legal Disclaimer (EU/Austria):

This design complies with EU Directive 2025/2436 (the "repair clause") and Austrian design law, which permit the production and sharing of functional spare parts for repair purposes, provided:

  1. The part has a is purely functional design and does not copy any protected aesthetic features of the original product.

  2. It is used solely for personal, non-commercial repair.

Important Notes:

  • The mention of Artweger Twinline is solely to indicate compatibility with this specific bathtub model and does not imply endorsement, affiliation, or approval by Artweger GmbH & Co. KG. This is a functional replacement part for personal repair purposes only, in accordance with EU Directive 2025/2436 (the "repair clause") and Austrian design law.

  • This design is not a registered or protected product of Artweger.

  • Commercial use or redistribution may infringe on patents or registered designs of the original manufacturer.

  • Always verify compatibility with your specific bathtub model before printing.


Disclaimer:

The creator assumes no liability for improper use, damage, or infringement claims. Use at your own risk.

Tagi