Ender 3 V2 Squash Ball Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squash Ball Feet which fit perfectly for Ender 3 V2
- Ocena
- 5 / 5
- Polubienia
- 143
- Pobrania
- 557
- Wydruki
- 20
- Wyświetlenia
- 4112
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A modified version to fit an Ender 3 V2.
Modifications from original (https://www.thingiverse.com/thing:3044013):
- 0.2 mm more space for the bars to fit but still don't slide on their own while printing
- cutout for psu cover in two feet (it is the same foot, just mirrored)
For a full set you need to print:
- 2x foot (front)
- 1x right psu foot
- 1x left psu foot
I just used cheap squash balls from decathlon.
https://www.decathlon.de/p/squashballe-sb-990-2er-pack-zwei-gelbe-punkte/_/R-p-312192
Version 2
I made a 2nd Version wich is raied by 25 mm because the ball holding part of the foot is wider than the base, so high pcu- or motheboard-cover won't fit with with Version 1.
I also added the .part files of V2 for simpler editing.
Example high covers:
https://www.prusaprinters.org/de/prints/152242-ender-3-v2-psu-cover-flat-bottom-92mm-fan
https://www.thingiverse.com/thing:4653994
Ground clearence
| feet | ground clearence |
|---|---|
| original Ender 3 v2 feet | 12.5 mm |
| V1 squash feet | ~ 37 mm |
| V2 raised squash feet | ~ 65 mm |
The ground clearence could vary depending on which squash balls are used.
Print Settings
Printer: Ender 3 V2
Supports: Yes
Use a low density support, 5% (Zig Zag) is enough or it will be hard to remove.
Resolution: 0.2
Infill: 20%
Filament: PLA
How I Designed This
Inspired by https://www.thingiverse.com/thing:4644945