Twist-Lock Pen – No Spring, 3-Position Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printed pen (aside from the ink refill itself).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple, functional 3D-printed pen made from two parts:
Main body
Locking cap
The locking cap has three positions:
Top – insert/remove refill
Middle – storage
Bottom – writing mode (refill locked)
No springs or small parts.
Designed to fit 6 mm diameter ink refills.
Specifically tested with:
Pentel EnerGel LRN5 refills https://www.pentel.com/products/energel-gel-pen-refill-lrn5
Other refills may also work as long as the diameter / dimensions are similar.
Print Settings:
Printer: Ender 3 V2 Neo
Material: eSun PLA+
Nozzle Temp: 195 °C
Bed Temp: 65 °C
Layer Height: 0.2 mm
Infill: 100%
Infill Pattern: Gyroid
Print Speed: 50 mm/s
Wall Speed: 25 mm/s
Recommended to print both parts standing vertically
The body can be printed horizontally for extra strength
Note that removing supports is difficult when printed horizontally