Electric Spin scrubber mounting bracket base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electric Spin scrubber mounting bracket base to replace the peel-and-stick mount supplied with the unit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The SpinBrush knock-off Electric Spin Scrubber by PUFTEM (and other "stick two words together" brands) includes an adhesive-backed cleat for a mounting bracket. Since the unit's handle takes quite a bit of force to insert/remove from the bracket, I decided I'm not going to rely on the adhesive (and my wall paint). So I designed a replacement screw-on bracket for #8 flat-head wood screws (into plastic drywall anchors). As seen in the pics, the Spin Scrubber handle is held by a special mount attached to the bracket, attached to the wall.
In case you're wondering if this will fit yours, don't worry, I'm including the FreeCAD model so you can adjust it to your heart's content.