DeWalt ToughSystem Tray Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these bins to gain some organization in your DeWalt ToughSystem Trays DWST08110 and DWST08120
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these bins to use in my DeWalt ToughSystem trays so I could better organize my parts. The Tray Grid file is optional, but keeps all the bins from moving around when you take one out. You will need two of the Tray Grids to fill the entire bottom of one of the DeWalt Trays.
The bin models are labeled DTSTO for the shallow tray (DWST08110) and DTTTO for the deep tray (DWST08120). The numbers represent the dimensions 040202 is 4 units wide, 2 units deep, and 2 units tall. The height is either a 01 or 02 for a half height (01) or full height (02). These can be stacked following these heights and still allow the trays to be stacked.
Please let me know what you think. I hope to make a parametric file that can allow for easy custom sizing in the future. If there is a size you need let me know and I can upload it. Additionally , let me know if the grid is too big for your printer. It just occurred to me that the size could be an issue for a lot of printers.
Any feedback is appreciated!