1 / 2
3" Exhaust hose adaptor for Omtech K40 laser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor to fit 3" Dryer vent hose to a K40 laser.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adaptor to fit 3" dryer vent hose to Omtec K40 laser. Probably fits most other K40 lasers. Prints with a very tight fit, will probably need a little sanding to fit, but it'll be tight enough to not need a clamp. The hose will need a clamp or a zip tie. I printed in PETG, but probably any filament will work fine. I used 3" dryer hose from Home Depot.