Silverstone Sugo SG13 Front Panel Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an extension for the Silverstone Sugo SG13 that makes room for an Nvidia 30 series GPU, made for a friend.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
an extension for the Silverstone Sugo SG13 that makes room for an Nvidia 30 series GPU, made for a friend. the clips on the front panel will need to be clipped off for it to fit without bowing up at all. i printed it in PETG for the extra heat resistance as opposed to PLA. the original model I printed had an error with the screw holes where the holes on the front panel side were too big, so I made them smaller but haven't bothered printing it out. let me know in the comments if the screw holes work at the current size
printed at 100% but probably not necessary
UPDATE: finally updated the model for larger GPUs. included an angled version for more secure screw holes. i used supports, but my printer isnt perfect so it needed the extra help.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
.30
Infill:
100%
Filament: Inland PETG
Category: Computer