Modular Battle Dreidels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build modular dreidels and battle each other for gelt!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Playing dreidels for gelt is boring when you're just spinning them randomly and hoping to get better letters! Instead, compose a bottom, shaft, and multiple modules together to construct your own battle dreidel, then battle your foes for supremacy! The dreidel that lasts the longest wins.
Details
Two versions, for right-handed screw direction (standard) and left-handed screw direction. Pick the lefty if you prefer to spin the dreidels counter-clockwise.
A spinning top arena is highly recommended to force dreidels into collision. I used a cheap Beyblade arena.
With no letters, these are technically just spinning tops, not really dreidels. Oh well, at least one of the modules is star-of-david-shaped.
Required material
Highly recommended but not required - 10mm metal ball bearings as weights. I used https://www.amazon.com/dp/B07SYY2SY4.
The flail module (see below) requires a string or a thin chain. I used https://www.amazon.com/dp/B09XV6SMNW.
Printing instructions
All parts are trivial to print and are already in print orientation.
The shafts are prone to breaking in the hands of overeager teens. Use extra perimeters and/or high infill.
Special instructions for the flail module:
The flail module is composed of one central module and 4 "cups".
You really have to use weights for this one (see above). Put one in each cup.
To connect the central module with the four cups, follow the diagram below - notice it required only one tie-off point. Keep the cups not too far from the central module, 3-4cm will do.
