42 modeli
Chanukiah: This model prints without supports, and down to 10% infill. Candles: I included a model of 9 small candles, which should be printed with a ~5mm brim and 100% infill. I carefully trim the brim away to get a good fit in the…
A small dreidel (sevivon) shaped bowl / dish / plate for Hanukkah. Place your candy, candles or serve a sufgania or some latkes in it. The bottom of the bowl is engraved with the holiday greeting “Hanukkah Sameach” in Hebrew, and the…
I was asked by my girlfriend to make a Menorah for her office as there was an abundance of Christmas decorations but limited on Hanukkah representation, so here is my first attempt at a Menorah! I included a test thread piece to check the…
Holiday Street Signs, No AMS required! Pre-Sliced pause for color swap! Scale up and hand as signs, or print out the stand and swap plates year round Assembled height is approximately 254mm (10in). Prints needed: Base - 1x Lower Sign…
This is a simple, original design of a Hanukkah dreidel. The letters נ (nun), ג (gimel), ה (hei), and ש (shin) are used. Printing instructions: It's recommended to print upside down using supports, with the bottom of the dreidel pointing up
This Hanukkiah design is inspired by the rich traditions and symbols of Hanukkah, blending modern aesthetics with timeless elements. The model features a balanced structure with eight candle holders and a central elevated Shamash,…
Now with the correct number of candles for Hanukkah. Use the 'no_cup' version if you want to print at less than 100% scale, the cups have been filled in so they will print properly at small scales. v2 Fixed non-manifold issue Category:…
Hanukkah Decorative Dreidel's for Hanging
You spin it. Game: You need: -This dreidel -Lots of chocolate money or sweets etc. How to play: 1. Any number of people can take part. 2. Each player begins the game with an equal number of game pieces (about 10-15) such as pennies, nuts,…
Hanukkah stamp Menorah, easy to print. Can be used with ink (PLA) or for decorating meal (PETG). Print settings: Infill: 15% Layer height: 0.20mm Speed: 200% If you like this model, please download, like and post makes, it helps alot.…
This is a kosher (I believe) Hanukkah menorah that I made for 2022. In Hebrew on the shamash are the words 'Shine Bright. There is a multicolor version and render here .
Can use as a menorah(hannukiah) for the jewish festival of hanukkah
This is a simple geometric model with hexagon and star of David shapes. For use with metal candleholder inserts like these: https://amzn.to/3Ykfh1e While you can line up 9 of these to make a hanuukkiah menorah, it takes up a lot of space,…
I created a Happy Hanukkah wall sign and keychain. One of the wall signs and keychains do not require an AMS. There is an AMS design too that does require an AMS using two colors. Print AMS sign face down on bed plate for best results.
Pasting Dave's original description here: Description Big, fun dreidel here! Simply glue the stem to the body (it should fit snugly in there so only a tiny tab is needed). Enjoy!
Fully functional Rocktopus Menorah. The candle holders are meant to fit into the tentacles. They accept up to 10mm diameter candles. I also designed a flame extruder that holds a lighter. Happy Hannukah! WARNING! do not have open flames…
Hanukkah spinning top with Hebrew letters (For Israel) Printed in 45deg, no support is needed.
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
Placard with "Happy Chanukkah" written in Hebrew, a Menorah, 3 dreidels, and a small jar labeled "Oil" in Hebrew.
A few supports are needed, I put a picture in the pictures of the recommended printing orientation, note that if you print the version with the hole - inside the hole itself there is no need for supports You can find 2 versions here A. A…
Print the pieces in the same color, or two different colors and let the games begin! The board includes a drawer to store your pieces when you are on the go. The whole design prints without supports, just choose your favorite colors and…
An easy to print dreidel for Hanukkah. To make a dreidel, print one body and two half stems. No supports are needed. Once printed, put the two halves of the stem together and press fit into the cavity in the body. The body comes in two…
This model is mostly for decoration and not functional, the printed material will melt when the fire will be close to the model. Fits the MK4S print bed size.
Whimsical holiday card that covers many of the December holidays. Fits in a standard USPS First Class envelope with 1oz. First Class postage. The bottom breaks off and slides into the slot to form a stand. This design is intended for a…
Oil Candle Holder for Hanukkah - מחזיק נרות שמן לחנוכיה printed in PLA, should be ok with the heat because the oil candle itself comes in a plasic housing.
The firmware for the menorah is available here: https://github.com/Alshochat/Menorah/tree/main file list and instructions: part QTY Special instructions Base Bottom RP2040 Super Mini No Battery 1 Base TOP 1 Bottom Part Duct 1 Bottom Part…
Adapters for Hanukkah candles for the menorah - to stick over the menorah for https://www.printables.com/model/1501874-chanukiah-is-based-on-the-structure-of-the-menorah :
Celebrate the Festival of Lights with this custom-designed 5-piece Hanukkah Cookie Cutter Set ! Perfect for baking holiday treats with family or making custom clay and dough crafts. Included Shapes: Menorah / Tall Candle Oil Pitcher (Jug)…
Eight Nights of Hanukkah Calendar to celebrate 8 days of holidays with your loved ones! This is designed to have 8 drawers to fit in small treats like candies, gift cards, or small toys. For optimal print settings; .2 layer height Tree…
Six cute articulated Hanukkah characters in one print: Menorah Cake, Dreidel, Gelt Coin, Sufganiyah, Maccabee Cat and Oil Jug, each with a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tails with 5…
A nine-branch Hanukkah menorah for standard 22 mm (7/8 inch) taper candles: eight sockets in a row and a raised shamash set just behind the middle, on a solid base with arches along the front. Use LED taper candles for safety, as a real…
Maccabee Cat is a fluffy blue kitten in a silver warrior helmet with a Star of David shield, big glossy eyes and a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tail with 5 linked segments that bend, no…
Gelt Coin is a chunky gold Hanukkah coin with an embossed menorah and Star of David, big glossy eyes, tiny arms and feet, and a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tail with 5 linked segments…
A four-sided spinning top for Hanukkah with the letters nun, gimel, hei and shin engraved on its sides (switch to pe for Israel in the Customizer), a comfortable stem to twist and a point it spins well on. Play for chocolate coins: nun,…
Menorah Cake is a pale blue Hanukkah cake critter with nine little candles, a sunny yellow scarf, big glossy eyes and a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tail with 5 linked segments that…
Dreidel is a smiling blue and gold spinning top character with a gold knob, a Hebrew letter on its side and a wiggly print-in-place tentacle tail. It stands on a small round base (it is a toy to display, not to spin). CUTE, FAST AND FLEXI…
Sufganiyah is a golden jelly donut critter with powdered sugar, a red jam dot, big glossy eyes and a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tail with 5 linked segments that bend, no assembly, no…
Oil Jug is a sweet pale green oil jug critter with a gold lid and base, two little gold horns, big glossy eyes and a wiggly print-in-place tentacle tail. CUTE, FAST AND FLEXI Print-in-place tentacle tail with 5 linked segments that bend,…
This is a simple, original design of a Hanukkah dreidel. The letters נ (nun), ג (gimel), ה (hei), and ש (shin) are used. Printing instructions: It's recommended to print upside down using supports, with the bottom of the dreidel pointing up
Pasting Dave's original description here: Description Big, fun dreidel here! Simply glue the stem to the body (it should fit snugly in there so only a tiny tab is needed). Enjoy!
