Hanukkah Menorah
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanukkah Menorah
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was asked by my girlfriend to make a Menorah for her office as there was an abundance of Christmas decorations but limited on Hanukkah representation, so here is my first attempt at a Menorah!
I included a test thread piece to check the fit between the "bulb" pieces, same threads for the base and menorah-top as well.
Printed the Menorah-Top piece with the candle surfaces down on the build plate.
Edit: The Bulb pieces are scaled down to 95% in Fusion for a better fit in the menorah-top. The other two components are not scaled down.
Material: PLA
Infill: 20%
0.6 mm nozzle
0.25 layer height
Supports: Yes -
Top - Organic
Base - None
Bulb - Snug
Brim: Yes