1 / 4
Universal 22mm Watch Band for Garmin Vivoactive 4 / 4S — zdjęcie 1
1 / 4

Universal 22mm Watch Band for Garmin Vivoactive 4 / 4S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in place watch band for any watch with a 22mm strap.

Ocena
0 / 5
Polubienia
17
Pobrania
72
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print in place watch band for any watch with a 22mm band. The original file on thingiverse recommends 0.1 mm resolution but 0.2 worked just fine (but the 0.1 mm will probably look better). In the pictures its printed with PLA but tested with PETG and works the same. Print without supports. The size in the file name is the distance between the hooks. To get you desired distance take the original strap off, lock the clasp where you would normally and measure it. 

Tagi