1 / 6
Simple & Modern DIY Coat Rack (44mm Wood + 3D Print) — zdjęcie 1
1 / 6

Simple & Modern DIY Coat Rack (44mm Wood + 3D Print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Create a stylish and sturdy stand for hats, bags, and coats using 44x44mm square timber and 20mm round rods.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This project combines the warmth of wood with the precision of 3D printing. It is designed for standard 44x44mm square timber and 20mm round wooden pegs.

Hardware needed:

  • 1x Spax screw 6x120mm (for the base)

  • 16x Spax screws 4.5x20mm (to fix the printed parts)

  • Wood glue (optional)

Components:

  1. StaenderBottom: Centers and stabilizes the cross-base.

  2. StaenderStamm45: Slide-on connectors for the trunk. Features 4 holes for 20mm pegs.

  3. StaenderTopCut: The top cap for 4 additional pegs.

Assembly Instructions:

  • Base: Create a cross-lap joint with two 50cm wooden bars. Drill a 6mm hole in the center to connect the main vertical trunk with the 120mm screw.

  • Fitment: Wood dimensions can vary. The base and top parts are designed for 44x44mm. If your wood is slightly larger, please sand the ends for a snug fit. The middle parts have a 45x45mm opening to slide easily.

  • Pegs: After screwing the printed parts to the wood, use a 20mm Forstner bit to drill into the wood through the holes in the print. This ensures the 20mm round bars sit deep and secure within the main beam.

Print Settings:

  • Material: PETG or ASA (for better durability)

  • Infill: 25% or more

  • Walls: 3-4 for strength

Tagi