Simple & Modern DIY Coat Rack (44mm Wood + 3D Print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Create a stylish and sturdy stand for hats, bags, and coats using 44x44mm square timber and 20mm round rods.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project combines the warmth of wood with the precision of 3D printing. It is designed for standard 44x44mm square timber and 20mm round wooden pegs.
Hardware needed:
1x Spax screw 6x120mm (for the base)
16x Spax screws 4.5x20mm (to fix the printed parts)
Wood glue (optional)
Components:
StaenderBottom: Centers and stabilizes the cross-base.
StaenderStamm45: Slide-on connectors for the trunk. Features 4 holes for 20mm pegs.
StaenderTopCut: The top cap for 4 additional pegs.
Assembly Instructions:
Base: Create a cross-lap joint with two 50cm wooden bars. Drill a 6mm hole in the center to connect the main vertical trunk with the 120mm screw.
Fitment: Wood dimensions can vary. The base and top parts are designed for 44x44mm. If your wood is slightly larger, please sand the ends for a snug fit. The middle parts have a 45x45mm opening to slide easily.
Pegs: After screwing the printed parts to the wood, use a 20mm Forstner bit to drill into the wood through the holes in the print. This ensures the 20mm round bars sit deep and secure within the main beam.
Print Settings:
Material: PETG or ASA (for better durability)
Infill: 25% or more
Walls: 3-4 for strength