Counting matching models…
NOTE: This is just the brown plaque! The actual Wolf Coat Hanger made by @3dprintable_by_lucas is a paid model available here . I absolutely loved this design but felt it looked strange just hanging from a nail on the wall. Thus, I…
Model, based on my family's dog. Laying and standing version. In the pictures the designs were scaled down to 70% ! Supports are needed to support the bookmark part in both versions! Simple supports only on printbed are sufficient. Added…
This is a simple coat hanger, only 5mm thick, but reinforced to be strong enough to hold heavy clothing items. It is printable (at a 45 degree angle) on any printer with a bed larger than 320mm x 320mm. I find 5mm to be a good compromise…
Ukraine's coat of arms is formed by a single azure field, featuring a preheraldic monogram linked to the 10th-century Riourikid dynasty and other heraldic elements extending to the 15th century. This monogram is described as a trident. It…
I designed this to fit on top of my fuse box because it's near my front door. Other designs had too large of a top part so I made this one much smaller to fit.
Stand for pre-order gift - wooden coat of arms of Kingdom Come: Deliverance II
Needed a new coat hook and didn't want to put a hole in the wall. Thought I might be able to use 3M Command Strips. Wasn't sure if it would be strong enough. So far, so good. There's a silhouette on the back where the command strip goes.…
Holder that fits Rubio monocoat color bottles in SYS3 org or SYS3 SORT-3 sortainer
Holder that fits Rubio monocoat color bottles in SYS3 org or SYS3 SORT-3 sortainer
Coat of Arms logo for the polish city of Łomża. Check out my other Polish models collection. Sprawdź moją kolekcję innych polskich modeli. https://www.printables.com/@m_collectable/collections/2722761
This part is a simple yet practical design created for the Makerspace where I work. It serves as a hanger for jackets and coats used by workshop participants. I hope you like the design and perhaps find inspiration to reuse or adapt the…
Tornado nozzle with enough room for the performance upgrade made by Cycle Fab
Le système de fixation original était trop fragile et obligeait à réimprimer toute la base en cas de casse. Je l'ai remplacé par 2 vis et 2 boulons, et perforé la base pour les fixer. Les ailes ne sont pas modifiées et sont réutilisables…
Original Model was too small for my large coat hangers so I quickly whipped this up in CAD. 2 variations: Larger circular holes Slots Can be printed in PLA, but recommend PETG for fatigue issues.
This allows you to use bottles laying around the house instead of purchasing Eastwood bottles. This was designed to be used with a 1lb nutricost creatine bottle but I found other bottles work as well such as a 2lb peanut butter bottle.
Simple coat hanger or towel hanger. Separate base and baseplate for more customization/ multiple colors. Snap together fitment that can be improved by glue. The model is quite small, the base being only an inch and a half wide. If you…
The lesser coat of arms of the Czech Republic. Compared to other models, this one: Fixes some issues of the original SVG from Wikipedia Optimized for printing at small scale Embossed - 3 heights (red background, black lion outline, white…
This is a vacuum adapter primarily for multicolor powdercoat. It fits a standard 1-¼ inch vacuum hose and tapers down to a 3/8 inch tube for detail vacuuming.
Inspiration At work we have Manuflex® industrial tables for lab usage. I missed a part to deal up with cables lying or hanging around there. So I played around with OpenSCAD to design something useful for that that purpose. These tables…
This is a backpack and/or coat hanger for a cubicle wall that is 3.5 inches wide. It has a rounded top to trace the top of the cubicle wall and a hook on the opposite side to secure it. It is a little overkill on the size of the hook but…
This door-mounted coat hanger was designed as a sturdy and practical solution for hanging jackets, bags, and accessories on a 25 mm thick door . Its solid construction makes it suitable for everyday use at home, in an office, or in a…
Remixed to fit a 2.2in cubical wall. Thanks @aboxman_253575. If you like it, please leave 5 stars!
Coat hook for acoustic panel. Print out horizontally for a stronger hook.
This is a remix of a cubicle coat hook from bharris555 on Thingiverse with changes to fit my work cubicle walls. The walls have fabric with a metal top. I printed it solid in PLA + and it will hold a full backpack with no problem. You can…
A simple coat hook I made specifically to be fastened to my bench beside the man door going into my garage.
I needed a double coat hook for the dog coats. We have a retriever, so I created a hook and then remixed the retriever keychain from another user and glued it on the hook.
A clean template with coat hooks. Kubernetes 3D logo and Azure 3D logo on it. Just for the IT department. Enough space on both sides to add names of people. The design has 4 crew holes.
This model features the Coat of Arms of Poland, recreated and modified in Fusion 360 based on an SVG reference file. The design has been prepared for multi-color printing. Each color element is separated by a 0.6 mm offset to ensure clean…
30 mm diameter jacket button with a smooth, slightly domed face. Designed as a replacement or custom button for coats and heavier garments. https://buymeacoffee.com/PrairieForge3D
you can hang your coat on the coat rack and then the box opens and you see a duck
Install it with two screws and a little glue. Modular, it adapts to any space. Assemble it however you like and have fun creating fantastic geometric shapes.
I saw this on instagram and couldn't be bothered to find it. so I just made one! There is one component that does not have a posted 3d model. component Is the main shaft that the hanger slides on which is just a 13mm rod or tube that is…
A simple, "classic" coat button 26,4mm in diameter and 4,6mm thick. (UPDATE 2026-03-13: the mesh was simplified/unnecessary triangles removed and the file size reduced) Have a nice print! gexographix, 2026 Made with FreeCAD on GNU/Linux,…
Well , -The Hollow Knight Coat Holder is an impressively versatile and feature-rich organizational solution that brings together functionality and fandom in one elegant design. This meticulously crafted coat holder doesn't just serve as a…
A simple coat hook with a 2.2 cm internal diameter. This was designed for a rod with a 2cm diameter, and should work for smaller ones as well. I printed this in PLA, which works great. However for optimal longevity I would suggest…
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
This is my version of the Harbor Freight Powder Coating Gun tunnel. It is very similar to the units available on the web. This will not fit the Vevor gun. Link for Vevor version here:…
Add a cheerful and cozy touch to your workspace with this adorable Raincoat Pencil Holder ! Inspired by classic rainy-day fashion, this cute and practical desk organizer keeps your pens, pencils, brushes, and small tools tidy while…
A coat rack made of two broom sticks, a random curtain rod, and some PLA. Materials Two Broom Sticks approximately 3cm in Diameter A bar that is 2.2 cm in Diameter PLA or other stiff filament Printing If you want better support and…
A unique 3D printable creation — this Dinosaur Shaped Wall Hook, T-Rex Design, Holds Coat Backpack, Fun Kids Decor Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
The bear breaking apart the atom is a famous symbol of a cold, restricted-access Russian city Zheleznogorsk aka Krasnoyarsk-26.
This 3D model represents the coat of arms of the House of Savoy in a version designed to be assembled without glue. The white inner part is intentionally slightly larger, so that it can be inserted with a little force and remain slightly…
A coat hanger and umbrella holder designed to be firmly taped to a windowsill. This makes it easy/nondestructive to install and detach. I didn't have a good spot to put my coat(s) or damp umbrella at work, so I made one. Use a reasonable…
Tento „medvědí erb“ je inspirován středověkou heraldikou a vyznačuje se dynamickými víry obklopujícími divokou medvědí hlavu, symbolizující sílu a odvahu.
on some Cheap Coat hangers the Wheel mounts fail when under high Load. Recomended Print Settings: 80-90% Infill 0,2mm Layer hight
The Plantagenet dynasty, which ruled England from 1154 to 1485, left a lasting mark on British history through its influential monarchs, political developments, and enduring symbols of royal authority. Among the most recognizable of these…
The Royal Coat of Arms of the United Kingdom is one of the most recognizable symbols of British sovereignty and tradition. Used by the reigning monarch and the British government, the coat of arms embodies centuries of history, heraldic…
William Marshal, 1st Earl of Pembroke (c.1147–1219), is remembered as one of the greatest knights of the medieval world. Serving five English kings during a turbulent period of political change, he earned a reputation for loyalty,…
Simple coathanger with a screwhole in it. Needed a quick and simple hanger to hang our coats/jackets when renovating our home. Screw size: 3mm 7mm "hat"
Stone carved Quetzalcoatl bust. Feathered serpent with fangs and long tongue. Minimal supports. Bold shelf display. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (…
Stone carved serpent with dual fangs. Minimal supports. Bold shelf display. 2 Sizes provided, prints on MINI Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
Connect two plastic coat hangers with one of these little extenders. Fits nicely with your standard white plastic coat hangers that you'll find at Target, Walmart, etc... It is snug, but very sturdy when connected. Use supports. Slow…
You need the rest of your coathanger and the metal part which connects the clips together with the coathanger. I am no expert on coathanger clips, but I just figured out that there are more types of them. I made two types which I had at…
a simple but functional door hook that can be used on any standard door or ledge to hang your coats, clothes or bags. Updated the design in a few ways so that it can function better, such as more pronounced hooks, so that coats and…
Tired of hanging your dripping coat on the back of your chair when you get into work in the morning? Print off this coat hanger, clip it to the top of your cubicle wall, and never have to sit on wet chairs again. The "Plain" version…
Arduino UNO R4 WiFi Spin Coater Controller + Custom 3D‑Printed Enclosure This project is a compact, purpose‑built spin‑coater designed primarily for coating 1/3‑size glass squares cut from standard microscope slides . It’s ideal for…
This was made pretty quickly, but I think it is a good idea. Plastic MUST not be completely melted, it only needs to be slighty plastic, otherwise it could fuse to the mold. This has a good example of doing it: Instead of using "3D print…
Here’s an item I’d place in the ‘Practical & Technical’ section I’ve designed these coat hooks in two different styles: the first is organic, and the second is, shall we say… ‘edgy’. The coat hook consists of two parts (which I recommend…
Mounts to a unistrut. Use the coathanger adapter to hang on a coathanger rail in your closet.
Made a spacer to be able to use IKEA Hultarp for hanging clothes at angle in my 35mm deep Pax wardrobe.
Coat hook for bott load-securing rail. Can be slotted into the rails.
Use 4 walls. A simple add-on hook designed for connecting multiple coat hangers vertically. The connector attaches directly to a standard clothes hanger and allows another hanger to be suspended underneath it. Multiple hooks can be…
Use 3 walls. A compact hanger attachment designed for organizing belts directly on a standard coat hanger. The connector attaches to the hanger hook area and provides space for up to 4 belts, helping save closet space while keeping…
Use 4 walls. A compact hanger attachment designed for hanging handbags, purses, and similar accessories directly on a standard clothes hanger. The connector attaches near the hanger hook and provides an additional hanging point for bags,…
Hello, I have a Pyramid for you as a stand for painting, coating, spraying paint . Great thing when you have to paint or spray boards, larger pieces. Then it doesn't lie on the ground. It's better to spray, paint with a brush. There is a…
--- By now I got around to printing and building it, on my printer the tolerances were fine and it turned out quite as imagined. Technically, the adjustment/folding feature works, but i found that after setting it up as i liked it, i…
As part of a major bathroom reno, we wanted to add robe hooks to the back of the door, but I didn't want to spend hours hunting for something that would complement our new fixtures, so I just built these myself. They've been in service…
This is a simple hook for hanging your stuff on the side of the very famous and used IKEA IVAR shelf system. Although it is marked a remix because the shape is taken from an existing model for a generic wall hook, it is a redesign from…
two types of hangers, two types of attachment: 1. gluing - this part has grooves in the back for better contact with the glue 2. fastening with screws - this part has two holes for a self-tapping screw 3mm I glued with “Mamut” glue I…
I needed a way to hang my hats in my closet. Because of the way my closet is laid out, it needed to be vertical and not a long horizontal rack. I made these hat holders to go on the wall by the door (and one behind the door). Each section…
This is a simple coat hanger for kids, fits up to 28mm (1 "1/8 ) diameter rod. It is part of a collection with many different customisation. https://www.printables.com/@Morbier/collections/1170157 You can use this one to personalize coat…
Door mounted hook for a coat hanger, multiple STL:s included to support 35-45mm door thickness. Names of models reflect door thickness - not total model size. I recommend to use it with the hook part facing the outwards part of your door,…
I design this small-ish coat hanger so it can be hanged in my van. I shared the step files so you can tweak the dimensions to your needs. Useful dimensions are in the favorites of the model in Fusion 360. In my case, I hang them over a…
Not every coat fits over the branches of the IKEA TJUSIG coat rack, so I designed additional hooks to slide over those to make additional hooks available (and smaller ones to be able to use the loops of the jackets). The hooks do not need…
This is a coat hanger for kids with a cute turtle, fits up to 28mm (1 "1/8 ) diameter rod. It is part of a collection with many different customisation. https://www.printables.com/@Morbier/collections/1170157
This is a coat hanger for kids with a cute fish, fits up to 28mm (1 "1/8 ) diameter rod. It is part of a collection with many different customisation. https://www.printables.com/@Morbier/collections/1170157
This is a coat hanger for kids with a cute frog, fits up to 28mm (1 "1/8 ) diameter rod. It is part of a collection with many different customisation. https://www.printables.com/@Morbier/collections/1170157
This is a mount for a 15mm wide pipe onto which you hang your coatracks.
This is a pretty realistic sugar coated gumdrop. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter **Resolution:** any Infill: 20-40% **Filament:** any pla/any any Category: Food & Drink
