Bat Coat Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.30 – €5.26 net (excluding VAT)
For file: bathanger_02mm_pla_mk3s_4h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.78 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 4.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bat Coat Hanger Is it a Bat? Is it a coat hanger? No one knows.
- Rating
- 3 / 5
- Likes
- 35
- Downloads
- 68
- Makes
- 1
- Views
- 694
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Bat Coat Hanger
Is it a Bat? Is it a coat hanger? No one knows.
All parts are printed parts so there are no additional screws or nuts needed.
Use a slotted screwdriver to get the screws in (they fit in pretty good even though you might not get them in by hand). Also don't overtighten them, they won't get loose.
Scale to 86% to fit on Prusa i3 printbeds.
The .3mf file already has all parts aligned on the printbed!
Changelog
01/13/2020: Fixed gears not fitting properly
01/14/2020: Changed design so there won't be additional screws needed
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!
● MY PROFILE ● PRUSA i3 CABLE CLIP ● PRUSA i3 LED LIGHTBAR ● POKER CHIPTRAY ● STACKABLE TEA ORGANIZER ●
Print instructions
Layer height shouldn't be higher than 0.2mm to get working screwthreads.
All parts can be aligned on the printbed at 86% scale.