1 / 3
Super Strong coat , towel and key hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hook that is strong enough to hang a winter coat and possible more
- Rating
- 5 / 5
- Likes
- 125
- Downloads
- 1,372
- Makes
- 14
- Views
- 3,175
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a hook with a hole to hang some stuff around the house.
it is strong enough to hang a winter coat, i believe it can bear a lot more load but didn't test the max strength.
Print settings
- layer height: 0.12 mm
- Number of walls: 4
- infill: 30% ( more infill equals more strength)
- Material: I used PLA. PETG, ABS, and other materials are possible.
- supports: no
Installing:
You will need for this build
- 1 flathead screw 35mm long. 3,4 or 5 mm thick.
- A 30mm long wall plug that suits your wall needs (drywall, wood etc). And diameter screw.
- A drill bit with the same diameter as the wall plug.
- a drill.
- Hammer
Choose where you want the hook. Mark a point where you want it. Pre dill the hole a bit if the wall is smooth. Drill the hole 35 mm deep. Hit the wall plug in with a hammer. Screw the hook in the wall with the screw.
Coming updates
will add a plaster wall plug in the future to print yourself.