Coat hanger for door or office divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple dual hanger that goes on top of a door or an office divider (max 40mm width).
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 41
- Makes
- 1
- Views
- 149
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close it. The hook/hanger is about 4,5mm thick on the top side.
I printed it in ASA on the side without any supports. PETG or PLA should be fine too. Printing it on the side creates the strenght it needs not to break.
It is easy to remodel it to fit other widths. This one is made for max 40mm width doors or office dividers