Counting matching models…
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
Done during the Covid pandemic. Take a look at the pics, it's all there. There's a OpenSCAD file available. Print it and use it! Stay safe.
Gedruckt aus ABS mit 4 Wandlinien, 0.4mm Linienbreite, 0.16mm Schichthöche, 20% Infill
This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.
If you're like me and you have fluctuated in size over the years but kept different size clothes still in your closet I designed these simple size hanger dividers to make it more organized. I've done most sizes that will be needed. To get…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
Perfect Holder for a 25mm Clothing Rail I designed a holder specifically for a 25mm clothing rail, and it works perfectly. Here are the details: Design Features The hook is slightly smaller than the rail's diameter, allowing the rail to…
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Ikea Besta Clothes rail, works with original IKEA screws Suitable for 20mm rods
Since I have a sloped ceiling, the IKEA Turbo clothing rack is not very space-efficient. To position the rack further to the side, this adapter is designed to shorten it to the desired height. The part shown in the picture is made from…
Easter holiday Bunny egg holder This design is meant for Easter holidays, so you can conveniently place your eggs in this organizer. It looks cute and simple and hopefully it will decorate your table at Easter holiday. If you enjoy my…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
Dish Soap, cloth and sponge holder. Cloth holder is removable
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
For you dollhouse dining pleasure Print upside-down, solid model for vase mode, any material. CAD Link:…
My first model that I made and printed myself. It works for my table from Jysk. But if you need some modification just use CAD model in Onshape and modify the sketch to match your table. I used 0% infill and 3 perimeters and works well…
Náhrada plastové části klasického kolíčku na prádlo. Vymodelovány byly tři varianty podle průměru střední části pružiny 5-6mm, 6-7mm a 7-8mm. Tištěno z materiálu PETG bez podpěr, výplň 50%, tloušťka vrstvy 0,2 mm.
The house we live in doesn't have a built in towel rack to hang our wash cloth. We used to drape them over the top of the shower curtain rod, but that can stain your shower curtain. The holder drapes over the top of your curtain rod and…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
You can either print the hanger or use the hook with a string attached if you need a longer length than the hanger allows. Model created to fit 220 mm printers I provide the freecad model if you want to make changes.
Printed on Ender 2 pro. No support, no brim. Swith filament to gain multi colour highlighting the icon. One is left blank to be modified at will.
After the old feet on our clothes airer wore through and it started scratching the floor and leaving rust stains, I designed new feet that are correctly angled to sit flat on the floor.
Replacement Horseshoe Clip for Clothes Hangers A simple replacement clip for standard plastic clothes hangers. This horseshoe-style clip slides onto the hanger's bottom bar and securely holds straps, skirts, or pants. Features: Tapered…
Replacement parts for a ceiling airer. They broke at my grandma's house so I decided to print new ones. If you're unsure about the size, just print one and check :)
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
Accessory for a clothes hanger, it will allow you to hang your cap, hat or scarf together with your coat. Two pieces for easy assembly, it does not require supports. The hole on the cap holder is a bit bigger than the hanger, to allow for…
1.- Introduction: We needed a nice small hook that would hang small oven cloth, to be hang next to our ovent in the wall of our wood kitchen. Explore my other Printables: https://www.printables.com/@rbid/models 2.- Printing: No special…
Disclaimer: This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
I refused to buy a new clothes dryer rack just because the plastic guide broke. Instead, I got to work and recreated the same plastic part that had snapped. If you have a similar clothes dryer rack and find yourself in the same situation,…
This is a simple bracket that I printed to easily hold a water bottle onto our rabbit's cage. We had a wire bracket before but it was annoying to use, this is much easier. I recommend that you use petg fimalent. Fits a bottle that's 2" in…
📌 Detailed Description This practical flip-out hook consists of three parts : Wall-mounted module Hook body Hook arm 🌀 Mechanics & Function The hook flips out at a 15° angle , making it easy to hang clothing. All parts are equipped with…
For use with my magnet corners. holds down the table cloth.
Common Retail Hanger Color Chart Size Traditional Color Small (S) Green Medium (M) White Large (L) Yellow Extra Large (XL) Blue 2XL Orange 3XL Brown 4XL Purple 5XL Black 6XL Grey 7XL Maroon / Dark Red or print whatever colour you want
Prints fast and with very little filament. I used double-sided tape to attach it to my drawer.
This modern puffy square pencil holder features a soft, cushioned look inspired by stitched leather accessories. Decorative stitch details and zipper-style lines add subtle visual interest while keeping a modern look A stylish addition to…
Missing a clothes rail holder or broke the original one? I’ve got you covered 🙂 This holder was designed to be stronger than most existing solutions , with an extended rail support area to improve strength and long-term durability. Solid…
This puffy cup pencil holder features an organic cylindrical shape with cloth-like deformations that mimic soft fabric under gentle tension. Subtle folds and compressed areas give the surface a tactile, cushioned appearance Blending…
The push pin shaped clothes hanger! It is projected to be printed in two parts, first is a screw mount. It have a hole to be screwed into the door, wall or other surface. To better hold the stuff it is tilted for 10°. But dont worry, the…
Overview This remix is of the awesome Clothes Folding Board / Shirt Folding Board . I split the panels up to fit onto a 220x220x220 print bed. The bottom panels are split in half with dovetail joints and top panels were split into four…
A little sink caddy or tray for whatever use you need I used a wood filament for the feet :)
Don't throw away your wooden folding clothes drying rack just because a leg broke! This 3D printed repair bracket acts as a reinforcing splint that slides over the broken leg joint and is secured with a screw or dowel through the pre-made…
Never able to find the cloth roller to remove the dog or cat hair from you clothes. Stick this on your wall and you will
This 40mm (1.57 inch) circular snap fastener takes inspiration from the YKK SNAD fastener. We have a circular couch with plywood base and the cushions are often on the floor. We also have a boat seating area with fiberglass benches. This…
Perfect for Whirlpool, Indesit and Bosch Clothes Dryer. Clothes Dryer Door Close © 2026 by Bernardo Piteira is licensed under CC BY-NC 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc/4.0/
01_Прищепка филамент Приспособление для фиксации двух прутков пластика в катушке между собой. Удобно использовать на катушке с малым расходом филамента и дополняет изделие 00_Клипса филамент . Изделие оптимизировано для сопла 0.5, 0.4.…
I ran out of those cheap molded plastic hangers so I decided to design one I could quickly print out whenever I needed an extra. Of course my print bed is very small, so I had to design it in parts. I was initially going to make them…
travel clothing hanger 2.0 , with turninng hook, small gaps for henging woman accessoris and hole for next piece. width 45cm 3 perimeters, 15% infil
This is my final doorhook. It works pretty well since approx. 1year. I printed with prusament in black galaxy. It is the best.
This is a clothes pin that can be printed out of TPU. For the best print quality, I have discovered that using low print speeds and enabling "avoid crossing wall" in the slicer is usually the best option. It is simple and takes just half…
This is a cloth clip to hold hanging wet cloth while drying outside. Regular sized cloth clip. Scale it as you want before 3d print.
Please adjust the scaling as you need it. Bitte die skalierung so anpassen wie du sie brauchst.
Clothes hanger I made the wohle cloat hanger to fit perfectly to my bathroom wall cloat dryer. pls like
A delicately 3D-printed vase designed to mimic the soft folds and draping of cloth, brought to life with bronze silk filament. The metallic sheen of the filament enhances the illusion, making the vase appear like shimmering fabric frozen…
Our new washer's drain pump (Whirlpool) was way too fast for our older plumbing, and was prone to making watery messes. This gets installed at the back of the washer where the drain hose connects, and slows the drain flow just enough for…
A simple door hanger for clothes and etc. Model for doors with a width of 40 millimeters and 1 or 2 hooks.
Dishcloth hanger which can be attached to your kitchen cabinet door. Different sized hangers for different thickness of cabinet doors are available: 16 mm 19 mm 24,5 mm Also two different bar lengths (inner size) are available: 200 mm 250…
Clothes dryer fix for 2,5mm rod and 1,2cm base stand.
This is sliding rack fixing + end pcs for other end and end plug. this model should be 17mm pipe and 5 mm wire suitable. made small change after printing, since was little loose.
Clothes hanger, train car for ticket to ride board game
A hook for clothes or bags that fits over the top of a door. The opening for the door is 35mm wide and its overall length is about 275 mm. I printed it lying on its side, with PLA, at .3mm layer height. Be sure to use a brim to avoid it…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Kitchen Sponge & Dishcloth Holder I took inspiration from Although my model is printable as a whole or in parts! This kitchen sponge holder keeps your sink area organized while allowing your cleaning tools to dry properly. The holder…
Came across the idea in YouTube shorts: https://youtube.com/shorts/WAc9c3enG_c?is=5QsHIAaA7PG0GiS1
Fits 15x30mm oval rail Material: petg Settings: enough walls to make completely solid part
I made a thing, It is print in place and you can use a multiboard rail or fix points. I used big screw fix points that are offset from the board so it isnt flush.
Parametric under-shelf square-rod hanger brackets (left/right/pair/assembly preview). This is a printable bracket system for hanging items from a square support rod beneath a shelf. It creates a soft-rounded, clean geometry look with a…
These are some retaining pucks to keep shade cloth tensioned and to stop pulling through with regular staples. the screws are designed for 4 gauge screws and are designed to be slightly undersized to pull the puck into the wood. Printed…
Every solution is unnecessary, until the problem arrives. GRABTOR is a Print-In-Place clothes hanger. No assembling, no supports. Yet small enough for the tiny 180x180mm print beds. Print, unfold, and it transforms into a full size…
Minimalist Kitchen Sink & Paper Towel Organizer (All-in-One Edition) Keep your countertop perfectly tidy and your cleaning tools organized with this expanded, sleek Kitchen Sink Organizer . This version maintains the modern, minimalist…
Generic male torso with cloth armor, for use as extra body for the many extra arm and head bits I had in my stash.
If you want to hang heavy things on it, it's better to print it in a larger size. It's better to secure it with double-sided tape.
I already designed a similar holder for my old kitchen. This time, I created another one for my new kitchen, easier to print, with no supports and with better water drainage. This is the old design:…
Wall-mounted plastic holder designed to secure up to 7 clothesline cords. Provides clean organization of drying lines and prevents tangling or sagging. The model is compact, easy to print, and suitable for indoor or outdoor use (depending…
If you have questions I will update this modle to show how to assemble.
Replacement foot for generic clothes airers/drying racks with a 12.55mm leg diameter. This is the common model of clothes airer sold in uk supermarkets. Mine was bought in Sainsbury's, but I have seen identical models in other shops.…
This model is a variation of the Clothes Peg by Slade1972. The goal was to optimize the clipping options, providing an extra option. PETG is good for indoor, but ASA would be even better for outdoor use - I think PLA would work for some…
This is a pretty full featured over-the-door hook designed for hanging clothes, bags, or towels. The aesthetic focus of this model is the "Basket" surface texture, which was generated using the CNC Kitchen Bump Mesh tool. Works well for…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
--- By now I got around to printing and building it, on my printer the tolerances were fine and it turned out quite as imagined. Technically, the adjustment/folding feature works, but i found that after setting it up as i liked it, i…
This is a simple hook for hanging your stuff on the side of the very famous and used IKEA IVAR shelf system. Although it is marked a remix because the shape is taken from an existing model for a generic wall hook, it is a redesign from…
A simple clothing hanger designed to print on a 220mm x 220mm footprint bed. I made it quickly because I forgot to bring any while moving and couldn't find any free models for them online; hopefully it's useful. With a .6mm Diamondback…
