IKEA E14 bulb shade vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRINT IN VASE MODE (Spiralize Outer Contour) and disable bottom layer. An opaque filament will work best. I tested…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
PRINT IN VASE MODE (Spiralize Outer Contour) and disable bottom layer.
An opaque filament will work best. I tested with translucent blue PLA and it wasn't great, just showed the shape of the bulb. Opaque white worked great though.
I had an old IKEA SOLLEFTEÅ Floor lamp, and my cats ruined the paper lampshade. I kept the lamp around because it still worked. Thought I could use vase mode to print some little bulb shades to help diffuse the light.
Should be just enough room for these E14 IKEA LED bulbs to fit inside. Put the print in the socket hole first (should be snug), then screw in the bulb.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Filament:
unknown PLA
White
Notes:
Spiralize outer contour, or vase mode. Remove bottom layer. Recommended to use skirt when printing
Category: Other