On3 Flex Track - v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On3 flex track for code 83 rail and to be printed in resin.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 309
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
On3 flex track created for code 83 rail.
Please let me know if you use code 70 rail in the comments it should work but may be a little bit loose. You'll have to glue the rail to the ties most likely.
There are 2 sets of files here. 1 set is of the tie strips unsupported. The other is of the tie-strips supported. I have tested the supported files many times and this is the most efficient way to get lots of tie strips on a single plate.
The files labeled "OneSideWeb" means the webbing on one side of the track ties but it's detached. If you place the detached webbing side to the outside of the curve you can use very small radii.
Note: This is meant to be printed in resin if you try fdm you let me know how it prints.