1 / 5
Everydays 041 – Christmas Tree Jewelry Holder — zdjęcie 1
1 / 5

Everydays 041 – Christmas Tree Jewelry Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,48 € – 1,81 € netto (bez VAT)

Dla pliku: Tree_0.25n_0.12mm_FLEX_COREONE_1h55m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,65 € netto (środek widełek).

Masa podana przez autora
15 g
Czas druku podany przez autora
1,92 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

🎄 A small Christmas tree that doubles as a jewelry holder — simple, festive, and fully press-fit.

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Today I designed a little Christmas tree that also works as a jewelry holder 💍🎄. The model prints in three parts: a base plate, tree part 1, and tree part 2. The two tree parts are printed flat and slide together to form a cross-shaped tree, which then press-fits securely into the base.

No glue, no screws — everything is press-fit, making it easy and fast to print and assemble. The flat tree elements provide plenty of edges to hang rings, necklaces, or earrings, while the overall shape stays clean and decorative. A functional holiday piece that looks great on a desk, shelf, or dresser.

Another joyful and practical entry in my Everydays Challenge, combining festive design with everyday usefulness ✨

💬 Support the Project

If you like what I’m doing, follow me and check back tomorrow to see what’s next in stock for the Everydays Challenge!
If you print this model, please leave a like or thumbs-up 👍 — it really helps keep the motivation going.
And don’t forget to share your make photos 📸 — I’d love to see your version in action!
💡 Have an idea for a model or something you’d like to see designed? Send me a message — I’d love to hear it!

Tagi