1 / 4
Crossbow filament cutter spacer for mini sherpa (Back and front) — zdjęcie 1
1 / 4

Crossbow filament cutter spacer for mini sherpa (Back and front)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Crossbow filament cutter spacer for mini sherpa and VZ Hextrudort Low Plus (Back + front mounting)

Ocena
0 / 5
Polubienia
9
Pobrania
58
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

When running CPAP the filament cutter needs to be actuated from the backside of the toolhead, and thus extra clearance is needed. 

Works perfectly on my ender 3 NG and my Voron 2.4 with hextrudort low plus. 

Extra space needed: Mini sherpa : 3.2mm

It's not really needed with the VZ hextrtudort Low Plus, however it the cutter will show some wear of being used over time. To prevent this you can use the 4mm (can only mount it from the front due to cutter hole spacing unfortunately.

Tagi