1 / 2
Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1 — zdjęcie 1
1 / 2

Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All the parts you need to print to run the BL-2S or a similar size motor.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Overview:

I bought the Traxxas BL-2S system from my local hobby shop thinking that it would fit. Boy, was I wrong. In an effort to save myself some money, I used my CAD skills to accommodate the larger motor. The parts bolt to the chassis exactly like the original parts. It is a tight fit for the motor, but it works.

I apologize to all of the 3mf fans out there, as Autodesk Inventor only allows for STL exports at the moment. On the bright side, the parts should print easily with no supports or ratchet slicer tricks. Only recommendation I have is to use a brim on the bodywork. 

Please let me know how I can improve the designs if you have any feedback. I greatly appreciate it since this is my first post here. :-)

IMPORTANT NOTE: In order for the motor to fit, you will have to remove the dust cover on the rear of the BL-2S motor.

Programs used: Autodesk Inventor

Modified from the original CAD files by Daniel Noree

Tagi