1 / 2
Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1 — image 1
1 / 2

Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

All the parts you need to print to run the BL-2S or a similar size motor.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
172
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Overview:

I bought the Traxxas BL-2S system from my local hobby shop thinking that it would fit. Boy, was I wrong. In an effort to save myself some money, I used my CAD skills to accommodate the larger motor. The parts bolt to the chassis exactly like the original parts. It is a tight fit for the motor, but it works.

I apologize to all of the 3mf fans out there, as Autodesk Inventor only allows for STL exports at the moment. On the bright side, the parts should print easily with no supports or ratchet slicer tricks. Only recommendation I have is to use a brim on the bodywork. 

Please let me know how I can improve the designs if you have any feedback. I greatly appreciate it since this is my first post here. :-)

IMPORTANT NOTE: In order for the motor to fit, you will have to remove the dust cover on the rear of the BL-2S motor.

Programs used: Autodesk Inventor

Modified from the original CAD files by Daniel Noree

Tags