Phone mount - flexible, universal, permanent. Use zipties.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to flexibly mount ANY smartphone to any wall, pole, pipe or branch.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Use this to mount any smartphone or even tablet anywhere. Using zipties makes it deliberately inconvenient for thieves to just take it from there. The "side" pieces are to be printed from solid materials and the middle part is to be printed from TPU or something else very flexible. 10-20% infill and a 1mm wall is more than enough for all the parts. The wall side piece might take some post processing if the ball fails to print accurately. ABS prints can easily be fixed with ABS-acetone gum, but other materials might best use epoxy resin corrections or something gluey. The wall side piece can be mounted by either a screw (4mm hole) or a ziptie going trough it. The rest of the parts are very optimized for FDM printing.