Illuminated Photo Lamp – Personalized LED Christmas Table & Tree Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Illuminated LED photo lamp where a 4×6" picture forms the body. Includes customizable tops and works as both a table dec
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🎄 Illuminated Photo Lamp – Personalized LED Christmas Table & Tree Ornament
A unique and customizable Christmas decoration where a standard 100×150 mm (4×6 inch) photo forms the body of the lamp. The photo is wrapped into a cylinder, while a Ø37 mm LED tealight inside provides a warm glow. It can be used as a table decoration or hung on the Christmas tree.
The design uses only a few printed parts – the photo itself becomes the lamp body.
🧩 Parts
Universal ring (used as both base and top ring) for Ø37 mm LED tealight
Christmas tree shaped top / hanger
Round loop top / hanger
Blank top for custom designs (names, dates, logos, figures)
(Print the universal ring twice: one for the base, one for the top.)
➕ Extra: Blank Top for Customization
A blank top version is included.
You can add names, dates, logos, or any custom model directly in your slicer (PrusaSlicer, Cura, etc.).
Simply import your model or text, place it on the blank top, and slice.
🖨 Print Settings (recommended)
Material: PLA
Layer height: 0.2 mm
Infill: 10–15%
Supports: No
Brim: No
Nozzle: 0.4 mm
Seam (Z-seam) position:
Make sure the seam is not placed on the inner edge, as the small ridge can
make the fit too tight for the photo and affect assembly.
Place the seam on the outer side instead.
🛠 Assembly
Print all parts (two copies of the universal ring).
Print your photo at 100×150 mm (4×6").
Insert the Ø37 mm LED tealight
Cut out the small square marked on the photo (shown in the pictures). This will be your starting edge.
Start wrapping the photo from this cut-out square around the base ring to form the cylinder.
Leave a slight overlap at the end so the photo holds itself in place.
Secure the top with the second ring and choose your preferred top.
Glue is optional for permanent assembly.
📏 Note
Designed for:
Photo size: 100×150 mm (4×6 inch)
LED tealight: Ø37 mm
Best results with ~200 g/m² photo paper (≈0.22 mm thick), but other paper types can also work.
If the fit is too tight or too loose, slightly adjust the print scale in your slicer (e.g. 98–102%).
The cut-out position is shown in the photos.
🎁 Use cases
Christmas table decoration
Christmas tree ornament
Personalized photo gift
Holiday keepsake
Feel free to use, print, and share this model — it’s my gift to the community. Please enjoy it for personal use, but don’t sell this model or any prints made from it. Thank you!
