Dock Mount for Dell Dell Pro Dock - WD25
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an under-table mounting bracket for the Dell Pro Dock (WD25 / SD25). Fasten with 4x 4mm countersunk wood screws.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 655
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
I was looking to hide my Dell Pro Dock under the table to reduce clutter and create a cleaner workspace.
It was designed for Dell Pro Dock family (WD25, SD25 and variables) with the goal of preserving air circulation, access to the rear and front ports and the power button.
You may use it for similarly sized docking stations - 90mm depth and 36.3mm height. Please check the alignment with the power button and the clearance for the cables on the back!
Use 4x 4mm countersunk wood screws to fasten it to the underside of your desk.
Printing
Follow the orientation provided on the attached STL. Both parts should be printed with the larger section facing the bed.
Given the intended use and the need of a higher tensile strength than PLA, I used 3DFila’s Tritan HT (a type of PCTG) on an Ender Pro S1. As shown on my pictures, I couldn’t prevent a little warping, but I got a functional (abeit ugly) print, so I count it as a win - I’m still trying to dial this filament on Orcaslicer.
As such, I recommended the use of a stronger filament as ABS, ASA, PCTG or PETG.