Gridfinity Base for Dewalt Tstak with Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a Gridfinity base plate to fit in the Dewalt Tstak two drawer unit.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 704
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is another Gridfinity base plate for the Dewalt Tstak two drawer unit. I have built it to take the standard 6mm x 2mm magnets. My original did not have magnets and the boxes in the toolkit kept moving around when in transit. The magnets solve that problem.
While it looks like others that are out there, I redesigned it completely to maximise the space. It is designed to work around the sockets where the stock dividers fit but if you cut those out then you get even more space!
Most of the bins that I put into it are half the standard (21mm) bases. This means that the space is used much more efficiently but both full size (42mm) and half size (21mm) based boxes fit.
I include a couple of photos of the toolbox that I have built for my sons.
I include the complete base and also 4 printable parts. The closest colour t Dewalt yellow that I could find was Overture Yellow Professional PLA.