Intellivision Cartridge-Style USB Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "shell" for Sandisk Ultra Fit USB drives, styled as an Intellivision cartridge; easier access for Sprint console.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An Intellivision cartridge-styled shell for USB flash drives (Sandisk Ultra Fit).
The location of USB ports on the Intellivision Sprint console, under the overhangs, makes accessing/removing very small USB flash drives a little awkward. I made this to make it easier to hold/remove such drives.
It is styled, rather than scaled, like an Intellivision cartridge to make it a bit more interesting.
Printing:
Works fine in PLA. Print w/ 3 walls, 15% infill. Looks better printed vertically, and at 0.1mm layer-height, unless you have a smooth build-plate, but that will require tree-supports.
.STL is oriented to print flat to avoid the need for supports.
Printer calibration/tolerances will determine if it snaps together snugly around the Ultra Fit drive, or needs adhesive.