Ikea MYGGBETT Waterproof Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea MYGGBETT waterproof enclosure
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This allows you to put your Ikea MYGGBETT sensor into a bag and drop it in this print to enable outdoor use. The included lid is designed to keep rain out.
Put the sensor in a bag (bag needs to be tight to the sensor to have clearance)
Drop sensor in (ensure notch on sensor matches your magnet plate - see the next step before you put it in).
The print is designed such that the opening should be facing up. The lid goes on top to keep water out. One side of the enclosure is thicker - this provides clearance so the lid will fit even when you mount the enclosure to a solid surface.
So thicker side adheres to your object
Lid goes on top
Sensor drops in so notch matches your magnetic plate