Air Filter for 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an air filter for your 3d printing chamber. It uses common Nispira 3-in-1 True HEPA Carbon Filter cartridges.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a filter for your 3d printers chamber. Helps remove the funky smells when you print those nasty smelling materials.
It can use 1 or 2 - 4i n.x4 in. Nispira 3-in-1 True HEPA Carbon Filter Cartridges or Osimo A2 Air Purifier filter cartridges. These are common filter cartridges found on Amazon or other sites. Also uses 2 inch hoses for the duct lines.
Hardware needed:
10 - M3x8 mm Socket head screws
10 - M3x4mm heat insert
4 - M4x50mm Socket head screws
4 - M4x12mm Flat head screws
10 ft - 2 in. flex hose
Printing Recommendations:
Base Pad (optional item) - Any
Fan Housing - Any
Filter Housing(s) - Any
Outer Shell(s) - Layer 0.16, any material, any infill
Outlet Hose Adapter - Any
Top Hose Adapter - Any
Bolt On 90 degree elbow (to mount to chamber)- Any
Updates:
1/18/2026 - Made snap on RatRig Logos for both the double filter version and the single filter version.
1/17/2026 - Reworked the outer shelf for better printing. The upright bars were a little thin and some would break in the printing process.
Outer Shell Dbl 01172026
1/17/2026 - Added the single filter components. These are shorter than the double filter components.
Outer Shell Single 01172026
Filter Housing Single 01172026