Air Filter for 3D Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an air filter for your 3d printing chamber. It uses common Nispira 3-in-1 True HEPA Carbon Filter cartridges.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 40
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a filter for your 3d printers chamber. Helps remove the funky smells when you print those nasty smelling materials.
It can use 1 or 2 - 4i n.x4 in. Nispira 3-in-1 True HEPA Carbon Filter Cartridges or Osimo A2 Air Purifier filter cartridges. These are common filter cartridges found on Amazon or other sites. Also uses 2 inch hoses for the duct lines.
Hardware needed:
10 - M3x8 mm Socket head screws
10 - M3x4mm heat insert
4 - M4x50mm Socket head screws
4 - M4x12mm Flat head screws
10 ft - 2 in. flex hose
Printing Recommendations:
Base Pad (optional item) - Any
Fan Housing - Any
Filter Housing(s) - Any
Outer Shell(s) - Layer 0.16, any material, any infill
Outlet Hose Adapter - Any
Top Hose Adapter - Any
Bolt On 90 degree elbow (to mount to chamber)- Any
Updates:
1/18/2026 - Made snap on RatRig Logos for both the double filter version and the single filter version.
1/17/2026 - Reworked the outer shelf for better printing. The upright bars were a little thin and some would break in the printing process.
Outer Shell Dbl 01172026
1/17/2026 - Added the single filter components. These are shorter than the double filter components.
Outer Shell Single 01172026
Filter Housing Single 01172026