Case for Goerz Minicord Cassettes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage case for the 40 exposure type "dual" cassettes for the Goerz Minicord 16mm subminiature still camera
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're one of the 5 people that 1) uses a Goerz Minicord, 2) has the 40 exposure cassettes for it and 3) also owns a 3D printer, congratulations, today's your lucky day!
Prints without support, large flat face towards bed, the grip area for your thumbs on the bottom part has a 45° bevel so it should print fine.
Tolerance between the two parts is designed to be 0.1mm so a relatively tight fit, depending on the accuracy of your printer you may want to very slightly scale the top in XY or use sanding paper on the bottom to get a good fit.
Select from a plain top or one with the Minicord logo.