Case for Goerz Minicord Cassettes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage case for the 40 exposure type "dual" cassettes for the Goerz Minicord 16mm subminiature still camera
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're one of the 5 people that 1) uses a Goerz Minicord, 2) has the 40 exposure cassettes for it and 3) also owns a 3D printer, congratulations, today's your lucky day!
Prints without support, large flat face towards bed, the grip area for your thumbs on the bottom part has a 45° bevel so it should print fine.
Tolerance between the two parts is designed to be 0.1mm so a relatively tight fit, depending on the accuracy of your printer you may want to very slightly scale the top in XY or use sanding paper on the bottom to get a good fit.
Select from a plain top or one with the Minicord logo.