1 / 8
Ceilex CE-DT24V-400W Power Supply End Cover — zdjęcie 1
1 / 8

Ceilex CE-DT24V-400W Power Supply End Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective covers for Ceilex 24V power supply

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Protective end cap covers for this power supply: https://www.amazon.com/CEILEX-Dimmable-Compatible-Potentiometer-Transformer/dp/B0DG6N39RW/ref=sr_1_7

I needed to mount a few of these power supplies in an easily accessible cabinet and I wasn't happy with the little plastic covers over the mains terminal. I also didn't like that the only retention for the cables were the terminals. So I designed this end cover that solves both of those problems.

Parts needed (M3 or M4 may work but I didn't check):

  • 4x 6-32 heat set inserts

  • 4x 1" 6-32 screws

  • 3x M3x4mm countersunk head screws

You could also probably use some coarse-threaded wood screws instead of the machine screws (if you're some kind of barbarian) 

--

Print settings:

eSun/Inland (Microcenter) PLA+ 

As fast as my little Creality K1 will go

No supports

Tagi