Manta M8P CB1/CM4 top down screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top down mounting solution for cooling the CB1 and Stepper drivers with 2 fans on the M8P board
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
No supports needed, 1X inbuilt support on one leg, that needs to be removed as per images.
Required Hardware: 7x M3 brass inserts, 7x M3X12 SHCS Cap screws, 1x 40mm fan, 1x DC centrifugal blower, 60×60×15 mm.
Print both parts upside down, no supports, PLA is fine, once you snap the top cover into the M8P mounting bracket it wont come out. snap it in before or after installing the centrifugal fan it dosent matter.
4x M3 Brass inserts for the 40mm fan go into the M8P bracket, 2 or 3 brass inserts go into the centrifugal fan and the M3x12 SHCS Cap Screws go in from underneath the M8P mount.
Connect both the fan wires together and add a 2.54mm XH connector to plug into the ran headder.