Table Saw Planer Router Safety Push Tool - REVISED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*** I have revised this design again. I didn't like the original wrist angle and so I changed the grip tilt. Now the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
*** I have revised this design again. I didn't like the original wrist angle and so I changed the grip tilt. Now the your wrist should be more naturally aligned. I also reinforced the fulcrum point to account for the increased angle.
Nicely balanced, lightweight and strong with generous grip. Makes cutting, planing and routing wood stock much safer.
Rotate to fit on bed diagonally for maximum size.
I recommend printing it with PETG or PLA+.
You may also like my other push stick
If you found this useful, please consider a SMALL DONATION @ https://www.paypal.me/shanekartz to help cover the time of design.
Please Post your Makes. I would love to see how they turn out.
Thanks, Enjoy!
Print Settings
Rafts: No
Supports: No
Layer Height: =< 0.3mm
Infill: 40% (50% recommended)
Filament: PETG or PLA+
Notes: Because I designed with fillet on both sides for comfort, I recommend I nice wide brim to keep it firmly adhered to the bed and prevent warping. Then remove the brim and sand smooth.