Liczymy pasujące modele…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
Gap 1mm-5mm Precise spacers for adjusting fronts ensuring a perfect fit. Even gaps, perfect alignment of fronts in furniture. Ideal for both DIY and professional furniture makers.
Designed for 18 mm thick board. Front raised by 1 mm Furniture front assembly tool This makes cabinet door assembly child's play The template is equipped with a support arm that helps hold the door with one hand, while the other hand can…
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element at a right angle. Window - guarantees perfect flushness of the panels. For strength print 100%…
This is a simple wall hanger for a carpenters square. It will work with either large or small squares and can be rotated 90 degrees to hang the square in the opposite direction. Holes big enough for a #8 flathead screw The thicker back…
Sabrina Carpenter logo earrings or keychain Different print profiles: 2layer : The color is in the bottom 2 layers. This prints the colored parts on the plate, giving it a shiny finish (which I prefer). It uses less filament changes than…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
Wall storage for carpenter triangle (designed for Gebhard Tooling) with hidden attachment. For dimensions see attached figure Ypu need following parts to assamble: 1x hex screw M5 with 10-16mm length 1 x M5 threaded inserts using…
This is a holder for use in a honeycomb storage wall. It is designed for the carpenter's angles by company Presch: https://www.presch-tools.com/products/anschlagwinkel-set
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
Gap 1mm-5mm Precise spacers for adjusting fronts ensuring a perfect fit. Even gaps, perfect alignment of fronts in furniture. Ideal for both DIY and professional furniture makers.
Designed for 18 mm thick board. Front raised by 1 mm Furniture front assembly tool This makes cabinet door assembly child's play The template is equipped with a support arm that helps hold the door with one hand, while the other hand can…
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
A fence that can be attached to a carpenter's square, to give it a bigger face to put against an edge that you want to be square to. This is similar in concept to commercial fences like the Lee Valley Veritas Square Fence. Those are…
This file is a 2x3 3'u' gridfinity holder with cutouts to fit two Fastcap ProCarpenter Tape Measures.
This competition is an opportunity to formalize this sorting platform. Often when I use I use my workbench, I put down my square and it falls with the vibrations of the saw. So in the center I made a space for my carpenter's square (it is…
20g PETG 0,2 mm layer, 3 walls, 15% gyroid infill holder for deep marking carpenter's pencil and spare graphites made for metal mechanical pencil as on picture
Multiboard holder for a Carpenter's / Mitre square (universal). This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
Carpenter Pencil Sharpener and Offset Block Easy forming a perfect sharp tip on your Carpenter Pencil can also be turned around and use it as an offset Block.
SharpGuide: Carpenter Pencil Sharpener Guide This unique 3D-printed carpenter pencil sharpener guide is designed to offer a precise and efficient sharpening experience for two popular pencil sizes—7x10mm and 7x15mm. The guide features…
I found the model by @Sebastian_57252, but it was for (apparently) European carpenter pencils. None of mine remotely matched the size of his original model, but since it was distributed as a Freecad model, resizing was easy. I modified…
This is an upgrade for the cheap Carpenter Pencil Sharpeners. The model has much space for shavings. You have to scale the lid to 102% to properly screw onto the container. Then use some CA-glue to glue the sharpener into its hole. My…
This is a sheath for standard carpenters pencils. If you are as forgetful as I am, you probably set your pencil down somewhere and spend 5 minutes to find it again. With this sheath, your pencil will be within reach because you have a…
Repairing a broken bed with a carpenter's joint. Connectors provide strong, aesthetic and professional connections of various elements, even structural ones, primarily wooden ones. A large number of well-thought-out holes allow them to be…
A guide (2 actually) for sharpening the end of a carpenters pencil. One version has a curve and is best used with a scalpel or snap off blade, the flat version can be used with most tools, a trimming knife or a chisel. Print in the…
I bought utterly expensive Sola all-material-all-purpose pencils just to find out that there was no sharpener available. So I designed these inserts for your average carpenters pencil sharpener and they work perfectly! The pencils I use…
Wall mounted sanding disc holders (I haven't actually put any of mine on the wall yet). I modeled a base version as well as versions that include slots for either 2 pencils, 2 carpenter pencils, or 1 of each. I keep making improvements to…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element at a right angle. Window - guarantees perfect flushness of the panels. For strength print 100%…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element. Window - guarantees perfect flushness of the panels. For strength print 100% infill. No supports…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element at a right angle. Window - guarantees perfect flushness of the panels. For strength print 100%…
This is a MultiConnect pencil holder for carpenters pencils and sharpener. As it has a single MultiConnect slot it will fit on either OpenGrid or Multiboard systems.
Tired of finding short carpenter pencil stubs lost in your pockets or throwing them away because they’re too short? Look no further! This practical extender lets you use every last bit of your pencil with a comfortable grip. The simple,…
Three different pencil holders that can be screwed directly to the wall or screwed to a french cleat strip. Each of them are slightly different sizes: one for regular pencils, one for cheap mechanical pencils, and one for carpenter pencils.
Tired of your speed or carpenter squares laying around or falling off weak hooks? This universal holder is designed specifically for DIYers and Woodworkers looking for a clean, secure, and permanent tool organization solution for their…
Holder for Carpenter Square. I made it for my Milwaukee Carpenter Squares. Print with tree support on build plate only.
Holder for connecting panels (thickness 15 mm) in the right place
Carpenter Square mount compatible with Skadis pegboards, modified using designs by Barto and s7emar.
On the rare occasions I actually manage to find one of my folding rulers, I've usually lost all my pencils, or vice versa. So, I decided to make a wall mounted holder for both, in hopes that I'll occasionally remember to return them to…
This STL file is designed for precision-minded makers who want their measuring tools locked, loaded, and easy to grab. The Pegboard Click mount securely holds your Combination Square, Framing Square, Metal Ruler, Tri Square, and Miter…
I'm reading "Carpenters - The Musical Legacy". So I thought I'd make a keyfob & fridge magnet using the Carpenters logo.
Printing For stability use the following settings: PCTG or PETG for 0.8mm nozzle: 4 walls/perimeters 25% honeycomb infill for 0.4mm nozzle: 8 walls/perimeters 35% honeycomb infill In the .3mf I actually cut the model into two parts and…
I have a carpenter tool belt that was missing its clasp. this is a replacement done in PETG. I have it at 100% infill as I suspect it might be under a bit of strain when worn. :-)
Summary This is a holder specifically made for Byggmax "Djuphålsmarkerande snickarpenna med stift" (deep-hole carpenters marking pencil) to be used on a IKEA SKÅDIS pegboard. General Dimensions This is pretty straight forward. It takes up…
Just slide part 2 onto the bottom of part one and tap together with a small hammer, a tape measure, or even a set of calipers!
This is a simple wall hanger for a carpenters square. It will work with either large or small squares and can be rotated 90 degrees to hang the square in the opposite direction. Holes big enough for a #8 flathead screw The thicker back…
Two models, one for new pencil storage in a vertical format and a second, shorter one, for used pencils if you're stubby inclined.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This print uses 3 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to White for the rest.
Sabrina Carpenter logo earrings or keychain Different print profiles: 2layer : The color is in the bottom 2 layers. This prints the colored parts on the plate, giving it a shiny finish (which I prefer). It uses less filament changes than…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
Wall storage for carpenter triangle (designed for Gebhard Tooling) with hidden attachment. For dimensions see attached figure Ypu need following parts to assamble: 1x hex screw M5 with 10-16mm length 1 x M5 threaded inserts using…
A minor remix of Tache's NicPro Carpenter Pencil Holder Sheath. All that was done was to extend the tip length by 7mm. I like to keep sharpened pencils ready to go. Tache's version, with the pencil I have, didn't have any extra room at…
Capture the spotlight with this Pop Star Figure, a meticulously crafted 3D printable statue inspired by modern musical icons. Featuring an elegant, high-fashion stage outfit, flowing hair, and a confident microphone-holding pose, this…
This is a holder for use in a honeycomb storage wall. It is designed for the carpenter's angles by company Presch: https://www.presch-tools.com/products/anschlagwinkel-set
I modified the original to use it with a carpenters pencil about 15x7mm dimesion. additionally you need the spring from the original design. I recomment beveling the corners of the spring to make insertion easier, I managed to get down to…
This is a replacement lid for the jar from a carpenter bee trap. I do not know what brand it is, if you do please comment and I'll update the description. For this trap, the bees will go in the holes in the wood, go into the jar, and get…
My apologizes drawing is wireframed just to show pocket holes which shown as three of them, zip file contains pdf file of these hole are for. Please figure out where else to get corner hinges purchased, STEM Meccano piece, or whatever…
This is my attempt to create a Village Carpenter for RPGS. You may need to resize this model to fit your RPGs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
This is a Gridfinity bin holder for Hiboom deep hole mechanical carpenter pencil and the included case of refills. https://www.amazon.com/Hiboom-Carpenter-Mechanical-Sharpener-Woodworking/dp/B0B7B64WX2
FREE Props Carpenter – Fantasy Miniatures (32mm STL for Tabletop RPG) Props for tabletop RPG encounters and storytelling. Complete Building Props BLACKRIDGE miniature pack for tabletop RPG encounters and storytelling. Perfect for one-shot…
A detailed statue of Saint Joseph represented with his traditional symbols: a carpenter’s hammer and a bouquet of lilies. The hammer symbolizes his work as a carpenter, while the lilies represent purity, faith, and devotion. The model…
This is the carpenters bench you use to build a house in Elders Scrolls 5 Skyrim. I based the model on some pictures I found on the web and a screen shot I took from the game. I drew a ruff cad model basing of a life size work bench then…
For 17 mm wide folding ruler. Grease a little before assembling for the first time. Supports: No Resolution: 0,12 - 0,16 Infill: 30
I have all kinds of those pesky carpenter bees flying around drilling holes into everything. I thought I would try to design up a trap like the ones people make out of wood. Mostly to see if I could and to see if a plastic design would…
Carpenters pencil dispenser, with hooks on the front to store one in use. Hopefully then they wont keep going missing! Designed for pencils 177mm x 13mm x 7.35mm 7" x 1/2" x 1/4" Message me if you want it to fit any other dimension…
just a simple, funny thing to give your "do it yourselfer" friends This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/fGevEp0KXUv Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
It works with most of this type (like on pics) carpenter's squares Screws from top are M4 size, to reduce looses if your carpenter's square is lower high. It don't have to be headless screw. Can be ordinary M4 or imperial size replacement…
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
A Business Card Holder in the form of a Carpenters planer.
Carpenter Pencil Protective Cap The solid carpenter pencil cap is a better tool to protect pencil metal part, making your construnction work at ease; You can also attach the caps on the pencil. Print Settings : Triangle_Clip_Light.stl…
for this model I advise supports, will utilize the base and magnets from the cap clip this is remixed from!
A wall mounted holder for a carpenters ruler. Mounts with four screws in countersunk holes on the backside, through the front openings. Maybe a little resizing is necessary for different brands of rulers. Printed with PLA, infill 20.…
I saw another model (https://www.printables.com/model/400968-wall-holder-for-carpenters-ruler) which gave me the idea for this, but I found it too bulky and it also needed a lot of filament for what it is. So I designed this from scratch,…
This Is a Pencil holder I designed for myself to make my fabrication processes more efficient. This little gizmo is one of my favorites and has solved the “misplaced” or "I lost my pencil" frustration while building. Add a Jump ring to…
Needed a way to hang my levels. Nothing fancy but they work.
Hammer made for OSAT project at Michigan Tech Use a 3/4" x 3.5" bolt Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Notes: Category: Hand Tools
coulper to connect 2 bottle spouts together. works with the new deerpark bottles with the thin cap. perfect for bee traps that keep bees from drilling your house to pieces. Print instructions Category: Containers Summary coulper to…
I needed an extremely simple block that fit snugly on a standard carpenter pencil for scribing offsets quickly. With a sharpened point, a pencil already has two offsets, this gives you another 4. Print Settings Printer Brand: Creality…
Carpenters knot also known as Zimmermannsknoten is a set of 6 interlocking parts originally designed by Japanese carpenters to securely fuse the intersecting wood structures when building rooftops. Building these knots is complex and has…
This holder hold two pieces of laminated plates (18mm thick) in right place, before screwing. Print instructions Category: Containers Summary This holder hold two pieces of laminated plates (18mm thick) in right place, before screwing.…
The latch on my daughter's play toolbox was missing when we bought it second-hand so I modeled a replacement. This design prints in two pieces. The larger of the two needs supports under the small cylinders which clip into the smaller…
Description This puzzle was an exercise in my apprenticeship as a carpenter, which my supervisor gave me. I was able to practise precise sawing and chiseling with it. In the end, however, it is a tricky puzzle that looks cool when…
Center finder with a straight edge (with built in storage) to use for measuring out in 1/8th inch increments using a carpenters pencil (thus the bigger holes). I printed in PLA at .2mm There are two versions, one with M4x20 screws for…
I bought my Veritas Carpenter's Gauge many years ago, so warranty replacement or repair was out of the question when the pencil holder broke. What does a 3D designer who owns a 3D printer do? You make a replacement. While I was at it, I…
Tools bags! Every carpenters go-to and every apprentices yolk of oppression. It'll print best oriented as is with some tree supports. I used soft PLA for the suspenders. You can use TPU if you prefer, as long as whatever you're using is…
These set of bins were designed for the “Hiboom 2 Pack Solid Carpenter Pencil with Lead Refills” set from Amazon. I am not sure if the slots will fit for pencils from other brands.
It holds a regular pencil and a carpenters pencil for quick dispatch just add some 1" double sided tape to the back and stick it where ya need it. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution:…
Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…
Printed from Prusament PC blend. New one fits tighter to the metal part. It is recommend to pour the printed part in boiling water to avoid breaking it while installing.
