1 / 3
Bottom Sleeve for FLYSKY Noble NB4 / NB4+ / NB4 PRO — zdjęcie 1
1 / 3

Bottom Sleeve for FLYSKY Noble NB4 / NB4+ / NB4 PRO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bottom Sleeve for FLYSKY Noble NB4 / NB4+ / NB4 PRO

Ocena
0 / 5
Polubienia
8
Pobrania
98
Wydruki
0
Wyświetlenia
348
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Remixed from magnetik

From magnetiks post on thingiverse: "This is a protective sleeve for the Flysky Noble NB4 battery sled. I made this to protect the aluminum from getting dinged up. It's a tight fit due to the little nibs that lock the battery into place. You may have to stress your part a bit to get the battery to slide in. I had no issues doing this. Otherwise you could just sand one of the nibs down a little"

Removed magnets and thinned out the bottom of the sleeve

Can be printed vertical without supports or horizontal with supports if color change is desired.

Tagi