Toilet Flange Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to hide a toilet flange for a 100mm pipe.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I had a new toilet installed and they had to glue in a new flange, which looked like a bit of an eyesore. So I designed this cover that slips over the flange and hides the glue.
Designed for a flange for pipes of 100mm.
Diameter of inner hole: 105mm
Outer diameter: 161mm
Total height: 53mm
Inner height: 50mm
You can print the template on a piece of A4 paper and cut out the parts to see if the model will fit your install.
The two halves fit together snugly, but can be firmly attached to each other with 4 screws via the provided holes.
For the best result, print the model oriented in the way it would be installed using (organic) supports and with ironing enabled. I printed the model in Prusament PETG Signal White on my Prusa MK3 printer.