EIBOS Series X: Easdry 608 bearing TUSH spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not…
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 392
- Wydruki
- 15
- Wyświetlenia
- 3263
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not allowing my spool to spin smoothly. Tested with SUNLU style spools only.
WILL NOT WORK WORK WITH SPOOLS WITH A SMALL INNER DIAMETER SMALLER THAN 70MM ISH OR OUTER DIAMETER LARGER THAN 195MM ISH DUE TO LIMITED SPACE IN THE DRYER BOX.
I didn't have any smaller bearings other than 608 but maybe a reminx with smaller bearing in the future will improve spool compatibility.
Print 2 of each file in ABS, ASA, PETG or any high temp resistant filament.
Other parts needed
4x 608 bearings
4x M3x12mm bolt (Longer works but will stick out of bolt side of course)
4x M3 Nut
Print Settings
Printer:
Biqu Bx
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20-30%
Filament:
N/A PETG
N/A
Category: 3D Printer Accessories