Liczymy pasujące modele…
This is a complete rework of an existing container @Matten79 made, that I have adapted for silica gel / desiccant rather than Calcium Chloride. It features a sturdy and printer-friendly design, multi-body lid so infill can be used to…
Adapter for 7Xmm spools to the Eibos 3D Easdry X Filament Dryer. Adaptador para bobinas de filamento de 7Xmm para el Secador de filamentos de Eibos 3D Easdry X Apto para bobinas de filamento PRINTALOT. Print Settings Rafts: No Supports:…
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not allowing my spool to spin smoothly. Tested with SUNLU style spools only. WILL NOT WORK WORK WITH SPOOLS WITH A SMALL INNER…
Press fit PTFE tube connector for the Eibos Easdry filament dryer. The barbed end press fits directly into the rubber grommet in the housing of the dryer. The threaded side accepts a PC4-M10 fitting to connect PTFE tubing. I printed in…
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
The threads are reversed to prevent unscrewing while the filament is being pulled off the spool. Printed in PETG, PLA is not heat resistant enough and will sag if the heater is running.
This is an adapter to connect the Magnetic PTFE Joiners by Line Arc Line to an EIBOS 3D Series X: Easdry filament dryer. It supports the “No Offset” type of PTFE joiner. It uses screws instead of additional magnets for the magnetic…
This model is made to fit bigger printers such as the Ankermake m5, this way you don't have to glue it together. I took PavelD EIBOS EasDry Upgrade and join them together. After joining them together I slightly made it bigger to fit the…
This holder allows placing your Eibos Easdry filament dryer on an IKEA Skadis pegboard. ⚠️ Be careful to not run the dryer when mounted on the wall, there were reports of overheating chamber. If you really want to, you could reverse the…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Update 17 Feb 2025: I have done a sturdier design V4 for a while now. Made the catch stronger (maybe too strong), added bridges at the 4 corners to reduce the square frame collapsing. Update 27 Apr 2023: Removed <Eibos Easdry Extender…
Having tried alternative spool holders for the Easdry I have had trouble with the spool slipping from its positioning and ruining prints. I also found it frustrating not to be able to easily adjust for spools of differing widths and so…
The Eibos Easdry has impractical spool stopper that uses rubber band that break easily . The spool tend to move to the cover of the dryer and disturb the airflow inside the dryer. This is the solution that i came with: tilt the dryer so…
Simple little stackable trays for drying silica in the Eibos Easdry. I recommend using the stand as the bottom layer, to allow for airflow. Printed in PETG and stood up well, even on the highest setting. No supports needed. To create the…
Desiccant dryer for Eibos Easdry. Print in ABS or PETG, definitely not PLA. Can be cut in slicer if you want smaller container.
Improved version by Daniel Gladyshev This is a muffler for the intake fan on the Eibos Series X Easdry filament dryer. It makes a decent reduction in the noise from air rushing in, but there is still some humming noise from the fan. I…
This is an extension for the popular EIBOS SERIES X dry boxes. IMHO this is maybe the best dry box on the market. Reliable, with coverage for the most used filaments and at very reasonable price… but with its 77 mm of clearance it lacks…
A Spool adapter for Redline 55mm and Sunlu 72mm Spools. Other dimensions can be made on request
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- Update. Two new versions added. Versions…
Hi ! I created simple but reliable adapter for Sunlu spools for use in filament dryer Eibos Easdry. It's designed for spools with diameter of central hole about ~73,5mm. I use that by myself and it's very helpful because without that…
I buy Eibos Easdry not only for drying filament but also as dry box for filament when i'm printing. But when i'm not using drying cycle then i'm getting back wet air from outside. I'm using filament dryer plug (…
The paracord finger pull on the door of my Eibos Easdry filament dryer broke pretty quickly, which made it really frustrating to open the door. I made this replacement finger pull that can be used instead. Note that the door on my unit is…
I saw this that had been cleaned up and remixed to fit on an Endre 3 and thought. I would like that! And so I made it happen. This one is just held on by friction so to bolts or screws will be needed. Printed in PLA+ 15% infill snug You…
Case for generic thermometer/hygrometer, with cable and temperature probe. I was frustrated that the Eibos Easdry didn't show the temperature when drying filament and have since found that it runs colder than stated. Inspired by Allemool…
printed in PETG or ASA will do. It is going to be a 100% infill print as there is not much filament needed.
Calcium chloride is a salt often used as a moisture absorbent, but it makes this goo that drips water. This two part container stores the calcium chloride in the inside container and the absorbed water can drop down to vat, where it can…
Hinge instead of the spool holder for mchangcreative 's EIBOS Series X: Easdry Upgrades (for filament spools <80mm wide) This will keep all the sides in place and you can only remove the original door. For best sealing in order to avoid…
Used 8x F688ZZ bearings and no screw. Removed the snap-fittings because they snapped on my version. Use friction fit, glue that can withstand high temp, or filament-weld the parts with a 3d pen. Printed my test in ASA using Bambu's…
Supports for stacking the boxes on top of each other.
This allows you to mount an Eibos Series X: Easdry filament dryer to your Core One. The mount replaces the standard bayonet-style spool holder. However, you do not have to forgo the standard spool holder, because the screw-on attachment…
Eibos Easdry 2020 Extrusion Holder Only need 2 screws M4 10mm for holding on extrusion
It improved my drying process massively. When I start drying I let it closed. When I start the print I open it and let the dryer run. When the print is done I close it and turn the dryer off. Its a lot faster and when you close it…
Insert to prevent Overture cardboard spools from getting shredded on the spool holder.
These feet for the "EIBOS 3D Filament Dryer Series X: Easdry" fit into the spool holder commonly used in the IKEA Table Style enclosures for the Prusa Mk Series Printers. It allows for the Dryer to sit on top of the enclosure and you can…
Insert to prevent Overture cardboard spools from getting shredded on the spool holder.
REMIX from: Eibos EasDry Doors by kamiliak that uses 4x2mm magnets. I didn't have 4x2mm magnets, so I did a quick edit in tinkercad to fit 6x2mm magnets. (You may need to turn on "detect thin walls" in your slicer. I printed in extra…
This is a remix to support PC4-M8 connector, got to reuse the spare PC4-M8 after upgrading prusa mini instead of buying new connector. I also change the body from cylinder to hex shape so that it can be tightened / loosened with a wrench.…
The EIBOS Series X: Easdry filament dryer is notorious for its handle breaking off the door (see last picture). To replace it, I've added a heat insert (3x3x5) for an M3 screw (M3x12) and printed a handle to make opening the door easier.…
You can use the spacer to make a gap between the lid and the housing or you can shut the lid and secure it with the the other side. For this to work you will also need this handle:…
[PREFACE: The photographed shelf holder is wider than the uploaded model. The uploaded model matches the manufacturer's specs and has 2 fewer columns of hexes. I widened my Series X to fit wider spools so my shelf is also wider.] I…
Remixed from ‘Eibos Easdry Mount For Fokoos Odin-5 F3’by nerokb. When I saw the original Fokoos version of this mount design I thought it was awesome and absolutely had to remix it for Ender 3. In this remix I’ve trimmed the fat for a…
I wanted a way to make the placement of the Eibos dryer more stationary, so here it is. Uses factory m4 hardware from the v400 spool holder. If you use the vented top spacers (pictured) or similar the whole top panel can be rotated to…
A simple little plug to seal the the hole in 6d6178 's adapter for dry boxes: https://www.printables.com/model/504853-magnetic-ptfe-joiner-adapter-for-eibos-easdry Printed at 0.10mm with 100% infill in TPU but would likely work in a solid…
Update 9/30/2023: Modified to be one piece and added a few screws in the center Will update in future to reduce the material on the back piece with hexagons or some other design. After mounting, you don't need to use the middle screws as…
Spool holder for the Easdry to use with F623-RS bearings and 3x77mm rod.
Allows Bambu Lab and Kingroon spools to rotate smoothly inside the Eibos Easdry Filament Dryer with little friction, the spools rotate much easier compared to without the adapter as i found my P1S Printer was having issues with not being…
Parts needed: M3 screws M3 heat inserts M3 hammer-nut or T-nut Recommended print settings: easdry _holder - 0,2mm - 25% infill - 4 perimeters - 4 top and bottom layers easdry_mount - 0,2mm - 40% infill - 5 perimeters - 5 top and bottom…
Hold the spool on bearing and is easier to put in. Added a small file with the wall thinner, Overture cardboard filament spool were a little too snug I recommend using the easdryRollerSmall file since it is the smallest and there is not a…
Although there are plenty of excellent spool adapters available, I created an adapter for the Eibos Easdry filament dryer that has a few improvements that I didn't find elsewhere. This model features vents on the sides and bottom that…
Description This design enables the connection of a PTFE tube via a PC4-M10 connector to the Eibos Easdry dryer and may also fit other dryers with identical openings (let me know if it works on other models too please). In comparison with…
My Easydry door mechanism broke, the string that you'd pull to open the dryer got torn apart. I designed a replacement. You'll need to print the 2 parts and you'll need an M3x18 bolt and M3 low profile nut. Unlike the original, this works…
I wanted a shelf to hold the EIBOS 3D Series X or whatever on top of my SV06 Plus. It's not a great dryer, I don't recommend it, but it's what I have. It works… kinda. PS, you can use this as a base to hold nearly anything up there. Snaps…
Remixed model moving the Eibos Easdry away from the Ikea Skadis pegboard giving a 20mm airgap to help prevent the unit overheating due to restricting airflow around the rear vents. Printed in Eryone Standard PETG 0.2 mm 25% Infill With…
This adapter is used to replace the original digital hygrometer on the Eibos Easdry with a circular analog hygrometer. The adapter slides into the cutout for the original hygrometer and is secured by a printable o-ring. 95A flex filament…
Use M3 mounting hardware if you want to use the rear spacer plate or the front bracing plate EIBOS Easdry model comes from https://grabcad.com/library/creality-ender-6-liquidcooling-update-v181-sept-16-2022-1 Prusa Mk3 model comes from…
I frequently order and use Sunlu brand filament but have discovered that their spool internal diameter is much larger than most. When I went to use my new Eibos Easdry filament dryer with my sunlu spools I found that the spool would drag…
