1 / 5
EIBOS Series X: Easdry shelf for IKEA Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to elevate my EIBOS Series X, power it while printing, and have full access to the knob, switch and holes.
- Ocena
- 1 / 5
- Polubienia
- 19
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1005
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (46)Powiązane
[PREFACE: The photographed shelf holder is wider than the uploaded model. The uploaded model matches the manufacturer's specs and has 2 fewer columns of hexes. I widened my Series X to fit wider spools so my shelf is also wider.]
I designed this holder with hexagons on the bottom to lighten the filament usage and give me access to the EIBOS in two orientations: (1) temp knob facing the ground and (2) power switch facing the ground.
Print information:
- I printed with Jessie PLA
- 0.4 nozzle at 0.2mm Quality
- 3 perimeters
- 50% rectilinear infill, which might be overkill
- Supports everywhere; I use a slightly modified version of bobstro's famous support settings (see screenshot)
- See screenshot for brim settings
- With supports and brim added, this model takes up nearly the entire width of a MK3 print surface so I disabled the skirt